AL300

AL300 est un traceur étanche idéal pour surveiller les véhicules, dans les domaines de la gestion des flottes, de la construction, des machines agricoles et des motos. Le bus CAN permet une intégration avancée avec le véhicule, tandis que le Bluetooth établit la connexion avec l’application mobile.
  • Connectivité : Connectivité LTE-M avec redémarrage en 2G après défaillance
  • Boîtier étanche : Boîtier renforcé conforme à la norme IP67
  • Bus CAN : Prend en charge le bus CAN pour obtenir les informations détaillées du moteur du véhicule
  • Bluetooth : Connectivité Bluetooth pour capteurs sans fil ou application mobile de l’Internet des objets
CELLULAR  
AL300-MG(Global) LTE FDD Cat.1
  B1, B2, B3, B4, B5, B8, B12, B13, B18, B19,B20, B25, B26, B27, B28, B66, B85
  GSM 850, 900, 1800, 1900
AL300-MX(N.America) LTE FDD Cat.1
  B2, B4, B5, B12, B13
Data Support UDP / IP, TCP / IP, SMS
Antenna Embedded cellular antenna
GNSS  
Receiver Type 33 Tracking channels
  99 Acquisition channels
Location Technology GPS & GLONASS
SBAS Support WAAS, EGNOS, GAGAN, MSAS
Tracking Sensitivity -167dBm
Acquisition Sensitivity -149dBm
Location Accuracy 2.5m CEP 50%
Antenna Internal
INPUTS/OUTPUTS  
Variant I (Digital Inputs SKU) 2 Digital Inputs
Variant II * (RS232 SKU) 1 Serial Interface (RS232 TX/RX)
Variant III * (CAN BUS) 1 Vehicle CAN BUS (CAN H/L)
  Protocol: ISO 15765-4, SAE J1939
Ignition Input 1 Positive Input
Digital Outputs 1 (Max. sink current 300mA)
LED Indicators 2 LEDs (GPS, Cellular)
Bluetooth * Low Energy v5.1, Class 2
SENSORS  
Accelerometer 3-Axis, ±16g
ELECTRICAL  
Operating Voltage DC 9V-32V Input
Current Consumption Operating: 100mA@12V
  Deep Sleep : 2.4mA@12V
Backup Battery 3.7V 250mAh
MEMORY  
Internal Flash Memory 16 Megabits
ENVIRONMENTAL  
Operating Temperature −20°C to 60°C
Humidity 95%RH @ 50° C non-condensing
Vibration/Shock MIL-STD-810G, SAE J1455
IP Rating IP67
PHYSICAL  
Dimension 88.9 mm x 76.5 mm x 21.2 mm (With screw bracket)
Weight 140g
Enclosure Flame Retardant PC
Mounting Method Screw mounting bracket, Adhesive, Cable Tie
CONNECTORS  
I/O Connection Molded power and I/O harness
SIM Card Socket NanoSIM (4FF)
Configuration Interface UART (Internal Connector only for Digital Input SKU)
CONFIGURATION  
Device Maintenance Firmware and configuration
  Update via (ATrack Device Management)
CERTIFICATIONS  
Standards CE, FCC, IC, TELEC, PTCRB, RoHS
Carriers AT&T, Verizon

* Optional accessories required